Victron SmartSolar MPPT 250/100-Tr VE.Can Bluetooth integrated

Victron SmartSolar 250/100-Tr VE.Can

Ultra-fast MPPT tracking
Especially under overcast skies, when the light intensity is constantly changing, the super-fast MPPT algorithm improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced maximum power point detection in partial shading.
In the case of partial shading, two or more maximum power points (MPP) may exist on the current-voltage curve. Conventional MPPTs tend to focus on a local MPP, but this may not be the optimal MPP. The innovative algorithm of the SmartSolar device will always maximize energy yield by focusing on the optimal MPP.

Highlight: Real-time data display on your smartphone! Built-in Bluetooth Smart: No dongle required
A Bluetooth-enabled smartphone can display a wide range of live data. The wireless solution for setting up, monitoring, and updating the controller using Apple and Android smartphones, tablets, or other devices.
In contrast to the BlueSolar controllers, the Bluetooth interface is already built in, so no additional accessories need to be purchased.

Intelligent battery management with the BatteryLife algorithm
The BatteryLife algorithm monitors the battery's state of charge and slightly increases the load disconnection threshold daily until the constant voltage is reached. From this point on, the load disconnection threshold is modulated so that the constant voltage is reached approximately once a week.
The BatteryLife algorithm will increase the operating life of the battery compared to conventional battery algorithms that always switch between “partially charged” and “fully charged” (due to low self-discharge)

Optional: plug-in LCD display
Simply remove the rubber seal that protects the connector on the front of the controller and plug in the display.
You can find the display here in our webshop: SmartSolar Display

Internal temperature sensor and optional external measurement of battery voltage, temperature and current via Bluetooth
Using a Smart Battery Sense, a BMV-712 Smart Battery Monitor, or a SmartShunt, battery voltage and temperature (and current, in the case of a BMV 712 or a SmartShunt) can be transmitted to one or more SmartSolar charge controllers.

Recovery function for fully discharged batteries
Will initiate charging even if the battery has been discharged to 0 volts. Reconnects to a fully discharged lithium-ion battery with an internal disconnect function.

Synchronized parallel charging with VE.Can or Bluetooth
With VE.Can, up to 25 devices can be synchronized, with Bluetooth up to 10 devices.

VE.Can: the solution for multiple controllers
With VE.Can, up to 25 controllers can be synchronized.