Victron EasySolar 24/1600/40-16 MPPT 100/50 1300W AC 24V

Easy Solar multifunctional device: charge controller, inverter and battery charger combined.

The EasySolar combines an MPPT solar charge controller, an inverter/charger and AC power distribution in a single device. The device is easy to install and requires little wiring.
This is a high-end device that leaves nothing to be desired: The combination of BlueSolar MPPT charge controller and Multiplus inverter/battery charger is intelligently combined with an AC distribution system.
Everything in a compact housing so that the system can be set up quickly and clearly. This minimizes installation costs and significantly reduces system complexity.
The device is rounded off by the integrated residual current circuit breaker and fuse for a total of 4 separate circuits.

The solar charge controller: Blue Solar MPPT 100/50

The integrated charge controller comes from the BlueSolar series from Victron and guarantees maximum yields with the ultra-fast MPPT process. Especially under overcast skies, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Information about the solar system can be read out via the VE.Direct port using the Bluetooth Smartdongle.
Critical partial shading of the solar modules is detected by the MPP controller and a new operating point is searched for so that high yields can still be achieved even under the most unfavorable circumstances.

MultiPlus 24/1600/40 inverter and battery charger

The Multiplus 24/1600/40 from Victron is a device combination of a 1300W sine wave inverter and battery charger. The smart integrated battery charger delivers an impressive 40A at 24V, so that the batteries can be charged extremely quickly when shore/mains power is available. The sine wave voltage converter integrated in the Multiplus transforms the 24V direct current from the battery into a 230V alternating current. Thanks to the real sine wave, the quality of the voltage is also perfect for sensitive electronic devices.

The following features characterize the high-end device:

• 1300 W continuous power AC, 3000 W peak power
• 24 V battery system voltage
• Pure sine wave inverter, suitable as UPS
• max. 1400 W PV power
• Main battery charging with up to 40 A
• Transfer switch with 16 A

AC distribution

The AC distribution consists of a residual current device (30 mA/16 A) and four AC outputs protected by two 10 A and two 16 A fuses. One 16 A output is controlled by the AC input: it only switches on when AC is available.

PowerAssist

The unique PowerAssist technology prevents overloading of the mains or generator power supply by supplying additional power via the inverter whenever required.

Unique software for solar systems

Several software programs (wizards) are available to configure the system for various grid-connected or stand-alone applications.