Victron Energy
Victron EasySolar 12/1600/70-16 MPPT 100/50 1300W AC 12V
Easy Solar multifunctional device: charge controller, inverter and battery charger combined.
The EasySolar combines an MPPT solar charge controller, an inverter/charger, and AC power distribution in a single device. Installation is simple, requiring minimal wiring.
This is a high-end device that leaves nothing to be desired: The combination of BlueSolar MPPT charge controller and Multiplus inverter/battery charger is intelligently combined with an AC distribution system.
All in a compact housing, allowing for quick and straightforward system setup. This minimizes installation costs and significantly reduces system complexity.
The device is rounded off by the integrated residual current circuit breaker and fuse for a total of 4 separate circuits.
The solar charging controller: Blue Solar MPPT 100/50
The integrated charge controller is part of Victron's BlueSolar series and guarantees maximum yields with the ultrafast MPPT process. Especially under overcast skies, when light intensity is constantly changing, an extremely fast MPPT controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Information about the solar system can be read out via the VE.Direct port using the Bluetooth Smartdongle.
Critical partial shading of the solar modules is detected by the MPP controller and a new operating point is searched for so that high yields can still be achieved even under the most unfavorable conditions.
MultiPlus 12/1600/70 inverter and battery charger
The Multiplus 12/1600/70 from Victron is a combination of a 1300W sine wave inverter and battery charger. The smart integrated battery charger delivers an impressive 70A, allowing batteries to be charged extremely quickly when shore/mains power is available. The Multiplus's integrated sine wave voltage converter transforms the 12V direct current from the battery into 230V alternating current. Thanks to the true sine wave, the voltage quality is perfect even for sensitive electronic devices.
The following features characterize the high-end device:
- 1300 W continuous AC power, 3000 W peak power
- 12 V battery system voltage
- Pure sine wave inverter, suitable as UPS
- max. 700 W PV power
- Main battery charging with up to 70 A
- Transfer switch with 16 A
AC distribution
The AC power distribution consists of a residual current device (30 mA/16 A) and four AC outputs protected by two 10 A and two 16 A fuses. One 16 A output is controlled by the AC input: It only switches on when AC power is available.
PowerAssist
The unique PowerAssist technology prevents overloading of the mains or generator power supply by supplying additional power via the inverter whenever required.
Unique software for solar systems
Several software programs (wizards) are available to configure the system for various grid-connected or stand-alone applications.
Technical data| Article number | 300-3295 |
|---|---|
| AC continuous power (W) | 1300W |
| Voltage regulation | 12V DC / 230V AC |
| Self-consumption without load | 8W |
| Self-consumption without load in energy saving mode | 2W |
| Operating ambient temperature range | -20°C to 50°C |
| Number of battery outputs | 2 |
| Battery voltage | 12V |
| Protection class IP | IP21 |
| Output voltage (V) | 230V AC / alternating current |
| Power quality | true sine wave |
| AC Output Frequency Range (Hz) | 50Hz / +-0.1Hz |
| Manufacturer part number | CEP121621000 |
| Output for data communication | VE.Bus |
| Product type | EasySolar combines an MPPT solar charge controller, an inverter/charger and AC power distribution in a single device |
| Transfer switch | Yes |
| Dimensions (mm) | 745 x 214 x 110 |
| Manufacturer | Victron Energy |
| Weight | 12 kg |
| guarantee | 5 years |
| Transfer switch switching capacity (A) | 16A |
| max. charging current of the battery charger | 1x 70A + 1x 4A (for starter battery) |
Information on VAT for solar systems
