WATTSTUNDE® solar module holding corners HXE/W ABS plastic white

WATTSTUNDE® retaining spoiler corners HXE/W

Motorhome holding spoiler corners made of solid ABS plastic for attaching solar modules to the vehicle roof.

You can use these retaining spoiler corners as an aerodynamic attachment for small solar modules or as additional stabilization for larger modules to ensure optimal and secure hold on the roof of your motorhome.

Other special features overview:

• Solid retaining spoiler corners
• UV-resistant
• Weatherproof
• Made of solid plastic
• Aerodynamic shape prevents driving noise
• Can be mounted with A-J215 L&L MS Polymer construction adhesive
• White and inconspicuous
• incl. stainless steel screws

With these solar holding corners (4 pieces), solar modules can be attached absolutely safely and easily. Before mounting and gluing the holding spoilers, the holding spoilers are screwed to the corners of the solar module.
The profiles are then glued to the vehicle roof together with the module and the strong A-J215 L&L MS polymer construction adhesive . The profiles ensure better wind resistance when driving and, thanks to the distance between the solar module and the mounting surface, ensure optimal ventilation behind the module.
Thus, a significant increase in performance can be achieved by cooling the solar panel compared to direct mounting.

The WATTSTUNDE® solar brackets and fastenings differ from many others due to their very high load capacity and the UV and weather-resistant surface sealing.



Additional Information:
To complete your solar island system for your motorhome, you will need not only the solar modules, the charge controller and the holder spoilers, but also a roof duct to lay the cables from the outside of the roof into the living area. This is where the connection to the charge controller is made. Our roof ducts have a PG safety screw connection (IP68) and are UV, weather and water resistant.
You can find all products in our shop category Fastening Systems .