WATTSTUNDE® 2000 W / 4000 W 24 V Sine Wave Inverter WS24/2000SI

WATTSTUNDE® Sine Wave Inverter 2000 W - WS24/2000SI

Compact and reliable pure sine wave inverter for powering 230 V AC consumers.

Efficient conversion from 24 V (DC) to 230 V (AC)

The WS24/2000SI inverter generates a 230 V AC voltage from the DC voltage of the connected battery, which is ideal for operating 230V household appliances, chargers, or other consumers.
Commercial devices such as computers, pumps, and fans can be operated just as easily as other small consumers.

The low standby consumption makes it an economical entry-level device when a clean sine wave voltage is required.
Since the fan operates load-controlled, further valuable energy is saved.
The practical USB port allows mobile phones and tablets to be charged directly without an additional power supply unit.

Comfortable All-rounder

The integrated LEDs indicate the operating status, so the device's status is visible at all times.
If the battery capacity runs low, an acoustic signal warns the user so that the load can be switched off in time.
If the battery voltage falls below a critical level, the inverter switches itself off automatically to prevent deep discharge of the battery.

The integrated fan runs quietly and cools the microelectronics, so even large loads can be operated safely.
All cables required for connection are included with the device, so installation can begin immediately.

The device is characterized by the following:

• Pure sine wave
• Converts 24V to 230V
• 2 x Schuko sockets on the device
• 1 x USB socket on the device
• Manual on/off switch
• Overheat protection functions
• Automatic shutdown in case of low battery capacity (deep discharge protection)
• Intelligent SoftStart function also enables the operation of inductive consumers
• Load-controlled fan
• Power like at home (AC voltage and Schuko socket)
• Warranty period: 2 years

Scope of delivery

• 1x WATTSTUNDE® Sine Wave Inverter 2000 W WS24/2000SI
• 1x Wired remote control
• 1x Battery connection cable 10 mm² 53 cm (with M8 ring terminals)
• 4x Flat fuse
• Operating instructions (German / English)

Note:

Observe starting currents!
When connecting inductive devices (hot plate, drill, refrigerator, etc.), please note that they often require a 3-10 times higher power for a short period to start up than indicated on the type plate.
The maximum short-term power demand must not exceed the maximum power of the inverter!