Victron Quattro 24/3000/70 Wechselrichter 2400 W und Ladegerät 24V – Marine Infinite Shop (1/3)

Victron Quattro 24/3000/70 Wechselrichter 2400 W und Ladegerät 24V – Marine Infinite Shop (2/3)

Victron Quattro 24/3000/70 Wechselrichter 2400 W und Ladegerät 24V – Marine Infinite Shop (3/3)

Victron Energy

Victron Quattro 24/3000/70 Inverter 2400 W and Charger 24V

Name: Victron Quattro 24/3000/70 Inverter 2400 W and Charger 24V
Brand: Victron Energy
SKU: 300-3048
Price: 2220.54 EUR
Availability: InStock

€2.220,54

Tax included. Shipping calculated at checkout

Quantity:

Innovative Combination Device from Victron: Sine Wave Inverter and 24V Battery Charger with Transfer Switch in One!

The Quattro 24/3000/70 from Victron is a combination device consisting of a 2400 W sine wave inverter, battery charger, and a transfer switch.
The cleverly integrated battery charger provides an impressive 120 A, allowing batteries to be charged extremely quickly when shore/grid power is available. The highlight: the device can be connected to two independent AC sources. This could be, for example, a generator and a shore power connection, or two generators. The Quattro automatically switches to the active source.
The sine wave inverter integrated into the Victron Quattro transforms the 24 V DC from the battery into 230 V AC. Thanks to the true sine wave, the voltage quality is perfectly suited even for sensitive electronic devices.
Furthermore, a lightning-fast 50 A transfer switch is also installed, allowing for grid-connected systems to be implemented.

Two AC Inputs with Integrated Transfer Switch

The Quattro can be connected to two independent AC sources: for example, to the public grid and a generator, or to two generators. The Quattro automatically connects to the active source.

Two AC Outputs

The main output ensures uninterrupted operation. In the event of a power failure or an interruption of shore/generator power, the Quattro takes over the supply of the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC is available at one of the Quattro's inputs. Consumers that should not discharge the battery, such as a water heater, can be connected to this output.

Virtually Unlimited Power through Parallel Connection

Up to 6 Quattros can be connected in parallel. For example, six 48/10000/140 units yield 54 kW/60 kVA of power or 840 A of charging current. Three-Phase Operation Three units can be configured for three-phase operation. But that's not all: Up to 6 sets of three devices can be connected in parallel, resulting in 162 kW/180 kVA of inverter power and over 2,500 A of charging capacity.

PowerControl – Working with Limited Generator Power, Restricted Shore or Grid Power

The Quattro is a very powerful battery charger. Therefore, it draws a lot of current from the generator or shore power supply (16 A per 5 kVA Quattro at 230 VAC). A current limit can be set for each of the AC inputs. The Quattro then takes into account other connected AC consumers and only uses the remaining current for charging. This prevents overloading the generator or grid connection.

PowerAssist – Increasing Shore Connection or Generator Power

With this function, the PowerControl principle gains a new dimension, as the Quattro supports any insufficiently dimensioned alternative source. Load peaks often occur only for a limited period. In such a case, the Quattro ensures that insufficient grid or generator power is immediately compensated by energy from the battery. When the load is reduced, i.e., consumers are switched off, the then sufficiently available energy can be used to charge the batteries.

Solar Power: AC Even in Case of Power Outage

The Quattro can be used in off-grid and grid-connected PV systems as well as in other alternative energy systems. Software for detecting a power outage is available.

System Configuration -
If settings need to be changed on a single device, this can be done within minutes using a DIP switch adjustment procedure. - Parallel-connected and three-phase systems can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. - Off-grid, grid-connected, and self-consumption systems that use grid-tie inverters and/or MPPT solar chargers can be configured using assistants (associated software for the respective systems).

Local Monitoring and Control

Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, Smartphone or Tablet (Bluetooth Smart), Laptop or Computer (USB or RS232).

Remote Monitoring and Control

Victron Ethernet Remote, Victron Global Remote, and the Color Control Panel. Data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. Remote Configuration: If systems with a Color Control Panel are connected to Ethernet, they can be accessed and settings can be changed remotely.

Technical Data

Item Number	300-3048
AC Continuous Power (W)	2400W
Voltage Regulation	24V DC / 230V AC
No-Load Self-Consumption	20W
No-Load Self-Consumption in Eco Mode	10W
Operating Ambient Temperature Range	-40°C to 65°C
Number of Battery Outputs	2
Battery Voltage	24V
IP Protection Rating	IP21
Output Voltage (V)	230V AC / Alternating Current
Power Quality	True Sine Wave
AC Output Frequency Range (Hz)	50Hz / +-0.1Hz
Manufacturer Part Number	QUA243020010
Product Type	Powerful pure sine wave inverter, battery charger with adaptive charging technology, and transfer switch. Additionally, the Quattro series can be connected to two independent AC sources.
Transfer Switch	1
Manufacturer	Victron Energy
Dimensions	362x258x218
Weight	19 kg
Warranty	5 Years Manufacturer's Warranty
Transfer Switch Switching Capacity (A)	50A

Production Sustainability No Information