Combined inverter WS-TwinPeak TP3k24 Plus MPPT

Combi sine wave inverter WS-TwinPeak 3000W 24V Plus from WATTSTUNDE for solar island systems

Become independent of the public power grid - no problem with the TwinPeak off-grid inverter!
The new voltage converter from the TwinPeak series is a compact combination device that combines a variety of functions in one device:

1. Pure sine wave inverter for solar off-grid systems
2. Battery charger
3. Solar charge controller
4. Shore power connection

The TwinPeak is the ideal solution for creating a fully functional solar off-grid system: By connecting PV modules (maximum 1500 Wp), the connected battery can be charged anytime and anywhere.
In addition to reliably operating 24 V DC devices, this powerful combination device also allows you to connect 230 V AC devices. It generates a pure sine wave voltage to power your home devices.
The device is rounded off by the shore power connection: This allows you to feed energy into your self-sufficient system from an external source, such as a mains connection. Don't compromise; the microprocessor-controlled device is as easy to use as it is reliable.
The TwinPeak is particularly suitable for small solar island systems in remote cabins or small garden houses that are to be operated off-grid.

Important!: It is not suitable for campers or boats. It must not be installed in vehicles!

The TwinPeak device features the following :

• Powerful stand-alone inverter: sine wave inverter, solar charge controller, battery charger in one
• True sine wave voltage for 230 V consumers (max. 3000 W continuous power)
• Powerful 60 A MPPT solar charge controller integrated: Connect solar cells with up to 1500 Wp power
• Integrated 30 A 24 V battery charger for automatic battery charging
• Shore power connection: if required, power can be fed in from the grid (transfer switch with 10 ms switching time integrated)
• Numerous setting options: priorities, power saving mode, etc. Almost all parameters can be freely adjusted. Further information can be found in the manual.
• LCD display: Information about the system can be read quickly and easily (battery and PV as well as consumers)
• suitable for AGM/Gel batteries (lead-acid batteries), LiFePO4 possible with BMS
• 24 V system voltage

MPPT charge controller: maximum power output guaranteed
Maximum Power Point Tracking (MPPT) technology allows you to charge your battery even faster and maximize the use of your solar system. The intelligent controller algorithm determines the point of maximum power output several times per second, which constantly fluctuates due to external conditions such as temperature and solar radiation. Compared to simpler series controllers, this allows a 10%-30% higher charging current to be generated. The integrated charging curve uses a four-stage IUoUo charging characteristic to ensure that the batteries are charged with the optimal voltage and current at all times. The parameters of the charging curve can be flexibly adjusted, making it possible to charge lithium-ion batteries as well as lead-acid batteries.

Reliable battery charger
Charge your batteries gently and reliably using the integrated battery charger.
An external 230 V AC system can be used as a power source. The integrated automatic charging system always charges with optimal current and voltage values ​​depending on the battery charge level, ensured by a reliable charging characteristic.
The 30 A charging current ensures that the batteries are fully recharged quickly. Of particular note is the ability to charge both lead-acid batteries and the new lithium-ion batteries. With the TwinPeak, you're perfectly prepared for the future.

Pure sine wave voltage for high demands
The TwinPeak converts the 24 V direct current (DC) from the battery into a clean, quartz-precise sine wave voltage of 230 V and 50 Hz. This means that consumers can be operated from home or on the go. With an output power of 3.0 kW, many high-performance consumers such as espresso machines, chargers, household appliances such as mixers or hand blenders, refrigerators or computers can be conveniently operated. Inductive loads such as stereo systems or televisions can also be reliably connected. For a short time (1 s), a peak current twice the nominal current can be drawn. This means that even the high starting current of some devices is not a problem. The integrated deep discharge protection monitors the battery charge level and automatically switches off the consumers when the battery capacity is running low and further energy consumption would damage the battery.

External 230 V connection
If the energy from the solar system is insufficient, the batteries can also be charged via the external connection. Simply feed shore power into your batteries. Intelligent microprocessor electronics ensure that the batteries are always operating at optimal levels. Overcharging is prevented, and the batteries are constantly monitored.
The integrated transfer switch (10 ms switching time) ensures uninterrupted operation of the loads. The input voltage and frequency range can be flexibly selected, enabling worldwide operation.

Variety of setting options
The combination device features a backlit LCD display. It provides status information about the off-grid solar system at any time, such as the current battery voltage, the connected load, PV current and voltage, and much more. Of course, it's also possible to read the battery charge level or receive a precise error message in the unlikely event of an error.
The almost unlimited setting options are also practical:
Almost all electrical parameters can be freely adjusted: A charging current limit or the voltages in the various charging phases can be adjusted if required.

Comfortable all-rounder
The device has a temperature and load-controlled ventilation system, so the device produces little noise.
The overtemperature, overload and short-circuit protection ensures that the device can be operated safely even in the event of a malfunction.
By combining many functions in one device, annoying cable clutter is eliminated and installation effort is minimized.
UPS operation for uninterruptible power supply (UPS) is also possible.
The built-in potential-free contact enables automatic starting of a generator or can act as an alarm contact when the battery charge level is low.
A device that leaves nothing to be desired.

software

The enclosed CD-ROM contains software that allows you to read TwinPeak data. Please note: We cannot guarantee software compatibility.

Technical information